HP 3PAR Remote Copy Software User Manual
Page 82
3.20
Setting Up Remote Copy
Remote Copy User’s Guide
InForm OS Version 2.3.1
◆
is the link IP address for the target system (for example,
172.16.1.11 and 172.16.2.11).
3
Check that the links have come up between the primary and backup storage servers by
using the
showrcopy
command on each storage server:
It might take several minutes for the links to come up between the two storage servers.
When the Target Information shows a Status of ready, and the Link Information
NOTE: For complete details on the
showrcopy
command, including valid
synchronization, link, and group states, see
On InServ2:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
108 32 IP ready mirror_config
Link Information
Target Node Address Status Options
108 0 10.100.24.108 Up
108 1 10.101.24.108 Up
receive 0 10.100.24.108 Up
receive 1 10.101.24.108 Up
Group Information
Name Target Status Role Mode Options
group1 108 Started Primary Sync
auto_recover,fail_wrt_on_err
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
vv0.0 1974 vv0.0 498 Synced NA
vv0.1 1975 vv0.1 499 Synced NA
vv0.2 1976 vv0.2 500 Synced NA
vv0.3 1977 vv0.3 501 Synced NA
vv0.4 1978 vv0.4 502 Synced NA