HP 3PAR Remote Copy Software - Manual (Page 318)

C.100 Synchronous Long Distance Remote Copy for Data Migration
Remote Copy User’s Guide InForm OS Version 2.3.1
1 Create a new target (InServC) for InServA by issuing the creatercopytarget
IP : command on InServA.
2 Issue the showrcopy command on InServA to verify InServC has been created.
3 Create a new target (InServC) for InServB by issuing the creatercopytarget
IP command on InServB.
# creatercopytarget InServC IP 0:3:1:10.100.33.63 1:3:1:10.101.33.63
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServB 13 FC ready 2FF70002AC0000C3 mirror_config
InServC 14 IP ready mirror_config
Link Information
Target Node Address Status Options
InServB 0:2:1 20210002AC0000C3 Up
InServB 1:2:1 21210002AC0000C3 Up
InServC 0:3:1 10.100.33.63 Up
InServC 1:3:1 10.101.33.63 Up
receive 0:2:1 20210002AC0000C3 Up
receive 1:2:1 21210002AC0000C3 Up
receive 0:3:1 receive Up
receive 1:3:1 receive Up
...
# creatercopytarget InServC IP 0:4:1:10.100.33.63 1:4:1:10.101.33.63