HP 3PAR Remote Copy Software - Manual (Page 150)

B.14 controlport
Remote Copy User’s Guide InForm OS Version 2.3.1
-pf
Prevents fragmentation of the packets when issuing the controlport rcip ping
command.
-unique_nwwn enable|disable
Enable or disable the use of a unique node WWN on the specified port
SPECIFIERS
Specifies the connection parameter of the port. Parameters can be loop, or point. The loop
parameter sets the port to arbitrated loop mode, the point parameter sets the port to
point-to-point mode. This specifier must be provided when issuing the ct subcommand.
Specifies the Fibre Channel Class-2 parameter of the port. Parameters can be one of ack0,
ack1, or disable. This specifier must be provided when issuing the cl2 subcommand.
Specifies the data rate of the Fibre Channel port. Rates can be 1, 2, 4, or auto. 1 sets the
data rate to 1 Gbps, 2 sets the data rate to 2 Gbps, and 4 sets the data rate to 4 Gbps. The
auto parameter sets the port to auto detect the data rate. This specifier must be used when
issuing the rate subcommand.
Specifies the value of the VCN. The VCN value can be set to enable or disable. This specifier
must be used when issuing the vcn subcommand.
Specifies the IMP port attribute. The IMP value can be set as enable or disable. This specifier
must be used when issuing the imp subcommand.
Specifies if interrupt coalescing is enabled or disabled. The value can be set as enable or
disable. This specifier must be used with the intcoal subcommand.
Specifies the port to be controlled.
node
Specifies the node number using a number from 0 to 7 .