HP 3PAR Remote Copy Software - Manual (Page 241)

C.23 N-to-1 Asynchronous Periodic Disaster Recovery Example
InForm OS Version 2.3.1 Remote Copy User’s Guide
5 On the restored system (InServ2), issue the showrcopy command and verify that the
target (InServ1) displays ready, the sending links display Up, and the volumes are
Syncing as shown in bold in the following example:
If I/O is continuing to be applied to the volumes on storage server InServ1, you must stop I/
O and perform a final manual synchronization before the original setup can be restored as
shown in the following example:
After the synchronization is verified, restore the direction of each system.
On InServ2:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ1 11 IP ready mirror_config
Link Information
Target Node Address Status Options
InServ1 0 10.100.33.63 Up
InServ1 1 10.101.33.63 Up
receive 0 10.100.33.63 Up
receive 1 10.101.33.63 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1 InServ1 Started Secondary-Rev Periodic Last-Sync Thu
Dec 14 18:19:17 PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 413 remotevv.0 21 Syncing Thu Dec 14 18:40:14 PST
2006
localvv.1 414 remotevv.1 22 Syncing Thu Dec 14 18:39:03 PST
2006
On InServ1:
# syncrcopy periodic_group_1.r96