HP 3PAR Remote Copy Software User Manual
Page 104
3.42
Initial Synchronization Using Tape Backup
Remote Copy User’s Guide
InForm OS Version 2.3.1
10
Stop Remote Copy for the Remote Copy volume group on InServ1:
where
is the Remote Copy volume group (for example sync_group_1).
This command creates a snapshot on the system that is the primary server for this volume
group. The snapshot is named
rcpy.
, where
is an
internally assigned group ID,
is the volume ID,
is an internally assigned
target ID, and
is an integer.
You can use the
copy of
field in
showvv
output to verify that the snapshot belongs to
the correct volume.
The snapshot is copied to tape and then copied to the volumes on system InServ2.
11
Reverse the direction of the volumes on InServ2 to allow the volumes to accept writes:
where
is the name of the secondary volume group (for example
sync_group_1.r96) that accepts writes.
The tape(s) containing data from InServ1 can now be copied to the volumes on InServ2.
12
Restore the original direction of the volumes on InServ2:
where
is the name of the secondary volume group (for example
sync_group_1.r96) whose original direction is restored.
On InServ1:
# stoprcopygroup
On InServ2:
# setrcopygroup reverse -local -current -nosnap
On InServ2:
# setrcopygroup reverse -local -current -nopromote