HP 3PAR Remote Copy Software - Manual (Page 255)

C.37 1-to-N Unidirectional Asynchronous Periodic Disaster Recovery Example
InForm OS Version 2.3.1 Remote Copy User’s Guide
7 Issue the showrcopy command to verify that the direction of InServ1 has been restored
and group periodic_group_1 displays as Primary, as shown in bold in the following
example:
On InServ1:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ2 7 IP ready mirror_config
InServ3 8 IP ready mirror_config
Link Information
Target Node Address Status Options
InServ2 0 10.100.33.96 Up
InServ2 1 10.101.33.96 Up
InServ3 0 10.100.33.11 Up
InServ3 1 10.101.33.11 Up
receive 0 10.100.33.96 Up
receive 1 10.101.33.96 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1 InServ2 Started Primary Periodic Last-Sync Thu Dec 14 18:39:03
PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 21 remotevv.0 413 Stale Thu Dec 14 18:40:14 PST 2006
localvv.1 22 remotevv.1 414 Stale Thu Dec 14 18:39:03 PST 2006
Name Target Status Role Mode Options
periodic_group_2 InServ3 Started Secondary Periodic over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.2 23 localvv.0 385 Synced Thu Dec 14 18:23:45 PST 2006
remotevv.3 24 localvv.1 386 Synced Thu Dec 14 18:23:44 PST 2006