HP 3PAR Remote Copy Software - Manual (Page 157)

B.21 creatercopytarget
InForm OS Version 2.3.1 Remote Copy User’s Guide
[]...
Specifies the node, slot, port of the Fibre Channel adaptor port on the primary system and
World Wide Name (WWN) of the peer port on the target system. This specifier can be
repeated.
RESTRICTIONS
Functionality of this command requires the 3PAR Remote Copy license. Contact your local
service provider for more information.
EXAMPLES
The following example creates a target definition named InServ2 on the primary system,
where the node numbers of the primary server’s Ethernet ports are located at 0:3:1 and
1:3:1 and the corresponding IP addresses on the backup server are 10.1.1.11 and
10.1.2.11 :
The following example creates a primary target definition named InServ1 on the backup
system, where the node numbers of the backup system’s Ethernet ports are located at 2:3:1
and 3:3:1 and the corresponding IP addresses on the primary server are 10.1.1.96 and
10.1.2.96 :
The following example creates a target definition named InServ2 on the local system where
the node WWN of the target system is 20010002AC000060:
cli% creatercopytarget InServ2 IP 0:3:1:10.1.1.11 1:3:1:10.1.2.11
cli% creatercopytarget InServ1 IP 2:3:1:10.1.1.96 3:3:1:10.1.2.96
cli% creatercopytarget InServ2 FC 20010002AC000060 0:4:1:22410002AC000060
1:4:1:23410002AC000060