HP 3PAR Remote Copy Software - Manual (Page 194)

B.58 showrcopy
Remote Copy User’s Guide InForm OS Version 2.3.1
targets []
Specifies either all target definitions or a specific target definition by name or by glob-style
pattern.
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
further information.
EXAMPLES
The following example displays output from the showrcopy command:
The following values can appear in the Target Information Status field:
■ new . The target’s link have yet to come up.
■ ready . The target has connected links.
cli% showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ2 9 IP ready mirror_config
Link Information
Target Node Address Status Options
InServ2 0 10.100.33.11 Up
InServ2 1 10.101.33.11 Up
receive 0 10.100.33.11 Up
receive 1 10.101.33.11 Up
Group Information
Name Target Status Role Mode Options
sync_group_1 InServ2 Started Primary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 391 remotevv.0 351 Syncing (25%) Thu Dec 14 17:37:40 PST 2006
localvv.1 392 remotevv.1 352 Syncing (40%) Thu Dec 14 17:37:40 PST 2006
Name Target Status Role Mode Options
sync_group_2.r11 InServ2 Started Secondary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 401 localvv.0 361 Syncing NA
remotevv.1 402 localvv.1 362 Syncing NA