HP 3PAR Remote Copy Software - Manual (Page 66)

3.4 Gathering Necessary Information
Remote Copy User’s Guide InForm OS Version 2.3.1
After the Remote Copy configuration is complete, you can use the InForm CLI
showport -rcip command or the showport -rcfc command to confirm the addresses you
specified during the setup.
Use the following figures to help visualize and organize your desired Remote Copy
configuration:
Figure 3-1. Network and Remote Copy Over IP Setup Information (Initial Pair)
Network
System 1
Backup
Gateway
Active
Gateway
System 2
Basic Remote Copy Pair Information:
TCP/IP