HP 3PAR Remote Copy Software - Manual (Page 139)

B.3 admitrcopylink
InForm OS Version 2.3.1 Remote Copy User’s Guide
COMMAND
admitrcopylink
DESCRIPTION
The admitrcopylink command adds one or more links (connections) to a Remote Copy
target system.
SYNTAX
■ For Remote Copy over IP (RCIP), the syntax for the admitrcopylink command is as
follows:
admitrcopylink ...
■ For Remote Copy over fibre channel (RCFC), the syntax for the admitrcopylink command
is as follows:
admitrcopylink ...
AUTHORITY
Service
OPTIONS
None.
SPECIFIERS
The target name, as specified with the creatercopytarget command (see
creatercopytarget on page B.20).
...
Specifies the node, slot, and port of the Ethernet port on the primary system and an IP
address on the target system.
...
Specifies the node, slot, and port of the Fibre Channel adaptor port on the primary system
and a world wide name (WWN) address on the target system.
NOTE: You need access to all domains in order to run this command.