HP 3PAR Remote Copy Software - Manual (Page 252)

C.34 1-to-N Unidirectional Asynchronous Periodic Disaster Recovery Example
Remote Copy User’s Guide InForm OS Version 2.3.1
4 Issue the showrcopy command and verify that the target (InServ1) displays ready, the
sending links display Up, and that the volumes are Syncing as shown in bold in the
following example:
On InServ2:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ1 7 IP ready mirror_config
Link Information
Target Node Address Status Options
InServ1 0 10.100.33.61 Up
InServ1 1 10.101.33.61 Up
receive 0 10.100.33.61 Up
receive 1 10.101.33.61 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1.r96 InServ1 Started Primary-Rev Periodic Last-Sync Thu Dec 14
18:39:03 PST 2006 , over
_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 21 localvv.0 413 Syncing (40%) Thu Dec 14 18:23:52 PST 2006
remotevv.1 22 localvv.1 414 Syncing (50%) Thu Dec 14 18:39:03 PST 2006