HP 3PAR Remote Copy Software - Manual (Page 214)

B.78 stoprcopy
Remote Copy User’s Guide InForm OS Version 2.3.1
EXAMPLES
The following example disables the Remote Copy functionality of all Remote Copy volume
groups:
NOTES
■ If the -stopgroups option is not used, all groups must already be stopped.
■ An older version of this command provided specifiers to disable the primary or backup
systems. These specifiers were deprecated in InForm OS release 2.2.3.
■ Unless the -stopgroups option is used, the command will fail if there are any Remote
Copy groups that are started. If the -clear option has been used, the configuration is
completely erased. Consequently, Remote Copy operations can not be restarted using only
the startrcopy command. The configuration must be rebuilt. Therefore, the -clear
option requires confirmation with the -f option, the TPDFORCE environment variable, or
by interactively typing, y . Refer to the InForm OS CLI Administrator’s Manual for
information about using environment variables.
cli% stoprcopy -stopgroups