Dwyer UXF3 - Manual (Page 53)

-45-
ź
Press the key once to display “+TOTAL PULSE” on the 2nd line.
Press the key again to select “-TOTAL PULSE”.
DO1 OUT
+TOTAL PULSE
Press the ENT key once to register “+TOTAL PULSE”.
DO1 OUT
COMPLETE
Ļ
ENT
ź
ź
ź
ź
ʊʊʊ “+TOTAL PULSE” has been registered. ʊʊʊ STATUS OUT
CONTACT ACTION
ENT
ź
Press the ENT key once to display “CONTACT ACTION”.
CONTACT ACTION
ACTIVE ON
Press the ENT key once to register “ACTIVE ON” (normally off).
* To select normally on, press the key.
CONTACT ACTION
COMPLETE
Ļ
ENT
ź
ź
ź
ź
ʊʊʊ “ACTIVE ON” has been registered. ʊʊʊ STATUS OUT
CONTACT ACTION
ESC Press the ESC key twice and then press the key 3 times to enter
the measurement mode.
0.000 %
0.000 m3/h
Bulletin F-107-UXF3