Bulletin f-107-uxf3 – Dwyer UXF3 User Manual

Page 38

-30-

Press the

ENT

key once to register the outer diameter.

ENT

ź
ź
ź
ź

ʊʊʊ Outer diameter has been registered. ʊʊʊ

OUTER DIAMETER

COMPLETE

OUTER DIAMETER

114.00 mm

Press the

key once to display “PIPE MATERIAL”.

Because PVC (factory set) is already registered, go to the next step.

Note) If the pipe is made of another material, press

ENT

key, and select

a corresponding menu by the

key.

PIPE MATERIAL

PVC

Press the

key once to display “WALL THICKNESS”.

WALL THICKNESS

4.00 mm

ENT

Press the

ENT

key once to blink the cursor.

WALL THICKNESS

04.00 mm

.00 mm

Move the cursor by the

key, and change the numeric value by the

key.

Operated to compose "7" because, from Piping data in Section 7.5., the
wall thickness of polyvinyl chloride pipe (tap water size) is 7.0mm.

WALL THICKNESS

.00 mm

Press the

ENT

key once to register the wall thickness.

WALL THICKNESS

COMPLETE

ENT

ź
ź
ź
ź

ʊʊʊ Wall thickness has been registered. ʊʊʊ

WALL THICKNESS

7.00 mm

Press the

key once to display “LINING MATERIAL”.

"NO LINING" (factory set) is already registered. Because there is no
lining, go to the next step.

Note) If lining is provided, press the

ENT

key and

key to select the

material or enter the sound velocity. Further, go to "LINING
THICKNESS", and input a lining thickness. Nothing is indicated in
case of "NO LINING".

LINING MATERIAL

NO LINING

Press the

key once to display "KIND OF FLUID". Because

"WATER" (factory set) is already registered, go to the next step.

Note) If fluid to be measured is other than water, press the

ENT

key, and

select the menu or enter the sound velocity.

KIND OF FLUID

WATER

Press the

key once to display "VISCOSITY".

Input the kinematic viscosity of the fluid to be measured.
Because the kinematic viscosity 1.0038E

-6

/s] of water at 20°C is

already registered, go to the next step.
In case of fluid other than water, input the kinematic viscosity at a
measurement status of fluid to be measured referring to data in Section
7.5., etc.

VISCOSITY

1.0038 E-6m2/s

ESC

Press the

ESC

key once to display “PROCESS SETTING”.

“S=31” is indicated on the 2nd line.
After mounting the frames on piping, insert into it 2 sensor units spaced
at 31 divisions.

PROCESS SETTING
S= 31 ( 93mm)

ESC

Press the

ESC

key once and the

key twice to return to the

measurement mode.

0.000 m3/h
0.000 m3

Bulletin F-107-UXF3