Display language, How to select the language, Bulletin f-107-uxf3 – Dwyer UXF3 User Manual
Page 35
-27-
4.5. Display language
4.5.1. How to select the language
Description
z Indication language (English, Japanese, German, French, Spanish) is selectable.
Setting contents
English (default setting), Japanese, German, French, Spanish
For actual keying, refer to the typical operation indicated below. Set the parameter protection to OFF beforehand. (See Section 4.4.1.)
Operation
(example)
Select English for the display language.
Key operation
Description
Display
ź
Press the
key 4 times to display “MAINTENANCE MODE”.
MAINTENANCE MODE
ENT
ź
Press the
ENT
key once to display “RAS INFORMATION”.
RAS INFORMATION
0000000000000000
ź
Press the
key 8 times to display “SYSTEM LANGUAGE”.
SYSTEM LANGUAGE
JAPANESE
ENT
ź
Press the
ENT
key once to blink on the 2nd line.
SYSTEM LANGUAGE
JAPANESE
ź
Press the
key 4 times to display “ENGLISH”.
SYSTEM LANGUAGE
ENGLISH
Press the
ENT
key once to register.
SYSTEM LANGUAGE
COMPLETE
Ļ
ENT
ź
ź
ź
ź
ʊʊʊ English has been registered. ʊʊʊ
SYSTEM LANGUAGE
ENGLISH
ESC
Press the
ESC
key or the
key to display the measurement mode.
0.000 m/s
0.000 m3/h
Operation
(example)
Select Japanese for the display language.
Key operation
Description
Display
ź
Press the
key 4 times to display “MAINTENANCE MODE”.
MAINTENANCE MODE
ENT
ź
Press the
ENT
key once to display “RAS INFORMATION”.
RAS INFORMAITION
0000000000000000
ź
Press the
key 8 times to display “SYSTEM LANGUAGE”.
SYSTEM LANGUAGE
ENGLISH
ENT
ź
Press the
ENT
key once to blink on the 2nd line.
SYSTEM LANGUAGE
ENGLISH
ź
Press the
key 4 times to display “JAPANESE”.
SYSTEM LANGUAGE
JAPANESE
Press the
ENT
key once to register.
SYSTEM LANGUAGE
㩎㨽㩥㩂
Ļ
ENT
ź
ź
ź
ź
ʊʊʊ Japanese has been registered. ʊʊʊ
㩃㩨㩧㩄㩨 (LANGUAGE)
㩐㩘㩧㩄㩨 (JAPANESE)
ESC
Press the
ESC
key or the
key to display the measurement mode.
0.000 m/s
0.000 m3/h
Bulletin F-107-UXF3