ZyXEL Communications MES-2110 - Manual (Page 60)

Chapter 5 The Web Configurator
MES-2110 User’s Guide
60
2
Disconnect and reconnect the MES-2110’s power to begin a session. When you
reconnect the MES-2110’s power, you will see the initial screen.
3
When you see “Username:”, type admin and press [Enter].
4
Type the administrative password and press [Enter]. Simply press [Enter] if you
did not set up a password.
5
Type enable and press [Enter] to turn on administrative commands.
6
Type reset default and press [Enter] to restore the system to the factory
defaults. The MES-2110 will restart.
Figure 19 Resetting the MES-2110: Via the Console Port
The MES-2110 is now reinitialized with a default configuration file.
Username: admin
Password:
MES-2110> enable
MES-2110# reset default