ZyXEL Communications MES-2110 - Manual (Page 171)

Chapter 22 Mgmt Config and System Restart Menu
MES-2110 User’s Guide
171
The following table describes the labels in this screen.
Table 69 Mgmt Config > Email Alarm & SYSLog Config
LABEL DESCRIPTION
Email Alarm Configuration
Email Alarm
Use this to enable or disable the e-mail alarm system.
Mail Server IP Enter the server name or the IP address of the mail server for the
e-mail addresses specified below. If this field is left blank, logs
and alerts messages will not be sent via e-mail.
From Assign a valid e-mail address to the MES-2110.
To The MES-2110 sends logs to the e-mail addresses specified in this
field. If this field is left blank, the MES-2110 does not send logs
via e-mail.
SYSLOG
SYSLOG Status
Use this to enable or disable syslog logging.
Backup Click this save syslog file to a TFTP server.
Show Click this to show a complete list of syslog messages.
Alarm Type Select the categories of alarm that you want to record and send
an e-mail alarm.
Undo Click this to restore your last saved settings.
Apply Click Apply to save your changes to the ZyXEL Device’s run-time
memory. The ZyXEL Device loses these changes if it is turned off
or loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory.