ZyXEL Communications MES-2110 - Manual (Page 41)

Chapter 4 Tutorials
MES-2110 User’s Guide
41
6
Click Save Settings in the navigation panel to store the changes permanently.
4.3 MVR Configuration
MVR manages multicast traffic from an upstream VLAN on a multicast server to
downstream subscribers in the same VLAN group. This allows you to regulate
bandwidth by not streaming multicast traffic to every device on your network but
rather just to the intended computers.
This tutorial shows you set up a Multicast VLAN Registration (MVR) group and then
direct all multicast traffic with matching VLAN IDs to it.
For the purposes of this tutorial, use the following settings:
Note: Make sure your Configuration > VLAN Menu > VLAN Type is set to Tag-
Based(802.1q) before proceeding.
Table 3 MVR Tutorial Values
SETTING VALUE
VLAN Name StreamVlan
VLAN ID 100
Source Port 9
Receiver Ports 1-4, 10
Multicast Group Mode Dynamic
Tagging Ports 9, 10
Multicast Group IP Addresses 223.3.3.1 ~ 223.3.3.10
Multicast Group ID 1