ZyXEL Communications MES-2110 - Manual (Page 200)

Chapter 23 Command Line Interface
MES-2110 User’s Guide
200
frame-type
Sets the port frame type for the current port(s).
You can choose to accept both non-member and
untagged incoming frames (fallback), just
untagged incoming frames (check) or drop all
non-member and untagged incoming frames on
a port (secure).
fallback
: Accepts incoming frames
(nonmember forward/untag forward).
check
: Accepts incoming frames (nonmember
drop/untag forward).
secure
: Accepts incoming frames (nonmember
drop/untag drop).
isolate
Isolates the specified prots. Isolated ports
belonging to the same VLAN do not
communicate with each other.
lock-mac
Locks the MAC configuration for the current
port(s).
mac-limit action
Enables or disables the MAC limit for the current
port(s).
mac-limit quantity <1-20>
Sets the MAC limit quantity for the current
port(s).
mirror
Enables port mirroring for the current port(s).
name
Sets a name for the port for the current port(s).
string
: Enter up to 15 characters.
no abnormal
Disables individual port detection for the current
port(s).
no active
Disables the current port(s).
no arp-inspection-trust
Disables ARP inspection trust for the current
port(s).
no bandwidth-limit egress
Disables egress rate for the current port(s).
no bandwidth-limit ingress
Disables ingress rate for the current port(s).
no dhcp snooping trust
Disables DHCP snooping trust for the current
port(s).
no flow-control
Disables flow control on the interface for the
current port(s).
no auto-negotiation
Disables auto-negotiation. for the current
port(s).
no isolate
Disables port isolation for the current port(s).
no lock-mac
Disables MAC locking for the port for the current
port(s).
no mirror
Disables port mirroring for the current port(s).
no broadcast-limit
Disables the broadcast packet limit for the
current port(s).
Table 83 Interface Mode Commands
COMMAND DESCRIPTION