ZyXEL Communications MES-2110 - Manual (Page 113)

MES-2110 User’s Guide
113
C
H A P T E R
1 4
Broadcast Storm Control
14.1 Overview
This chapter introduces and shows you how to configure the broadcast storm
control feature.
14.2 Broadcast Storm Control Setup
Broadcast storm control limits the number of broadcast, multicast and destination
lookup failure (DLF) frames the MES-2110 receives per second on the ports. When
the maximum number of allowable broadcast, multicast and/or DLF frames is
reached per second, the subsequent frames are discarded. Enable this feature to
reduce broadcast, multicast and/or DLF frames in your network. You can specify
limits for each frame type on each port.
Click Configuration > Storm Control in the navigation panel to display the
screen as shown next.
Figure 47 Configuration > Storm Control