ZyXEL Communications MES-2110 - Manual (Page 138)

Chapter 18 DHCP Relay Configuration
MES-2110 User’s Guide
138
18.2 DHCP Relay Configuration
This screen allows you to configure the DHCP Relay Agent, which sends messages
between DHCP clients and DHCP servers on different IP networks.
Click Configuration > DHCP Relay Configuration to open this screen.
Figure 65 Configuration > DHCP Relay Configuration
The following table describes the labels in this screen.
VLAN ID (2 bytes) This is the VLAN that the port belongs to.
Remote ID (up to 64 bytes) This optional field is set on the DHCP Relay
Configuration (
Section 19.2 on page 143 ) screen
Table 51 Relay Agent Information
FIELD LABELS DESCRIPTION
Table 52 Configuration > DHCP Relay Configuration
LABEL DESCRIPTION
DHCP Relay Agent Configuration
Active
Select this check box to enable DHCP relay.
Remote DHCP Server Enter the IP address of a DHCP server in dotted decimal notation.
Smart Relay Exclude
VLAN Enter the VLAN ID to exclude from the DHCP relay function.
Option82 Select this to have the MES-2110 add information (slot number,
port number and VLAN ID) to client DHCP requests that it relays
to a DHCP server.