ZyXEL Communications MES-2110 - Manual (Page 47)

Chapter 4 Tutorials
MES-2110 User’s Guide
47
4.6 Outgoing Traffic Bandwidth
This tutorial shows you how to set the outgoing traffic bandwidth limit to 1 Mbps
for Port 2.
To configure outgoing traffic bandwidth:
1
Open the Configuration > Bandwidth Control screen.
2
Set the Port Number to Port 2.
3
In the Egress row, set the Rate Level to 1M~100M (1M+), the Rate Limit to
1000 k, and the Active option to Enable.
4
Click Apply.
5
Click Save Settings in the navigation panel to store the changes permanently.
2
1
3
4