ZyXEL Communications MES-2110 - Manual (Page 208)

Chapter 24 Troubleshooting
MES-2110 User’s Guide
208
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See Section 3.4 on
page 35 .
2
Check the hardware connections. See Section 24.1 on page 207 .
3
Inspect your cables for damage. Contact the vendor to replace any damaged
cables.
4
Disconnect and re-connect the power adaptor or cord to the MES-2110.
5
If the problem continues, contact the vendor.
24.2 MES-2110 Access and Login
I forgot the IP address for the MES-2110.
1
The default IP address is 192.168.1.1.
2
Use the console port to log in to the MES-2110.
3
If this does not work, you have to reset the device to its factory defaults. See
Section 5.6 on page 59 .
I forgot the username and/or password.
1
The default username is admin and the default password is 1234.
2
If this does not work, you have to reset the device to its factory defaults. See
Section 5.6 on page 59 .