6 mvr group configuration – ZyXEL Communications MES-2110 User Manual
Page 131

Chapter 17 IGMP
MES-2110 User’s Guide
131
17.6 MVR Group Configuration
All source ports and receiver ports belonging to a multicast group can receive
multicast data sent to this multicast group.
Configure MVR IP multicast group address(es) in the Group Configuration
screen. Click Group Configuration in the MVR screen.
Port
This field displays the port number on the MES-2110.
Source Port
Select this option to set this port as the MVR source port that sends and
receives multicast traffic. All source ports must belong to a single
multicast VLAN.
Receiver Port
Select this option to set this port as a receiver port that only receives
multicast traffic.
None
Select this option to set the port not to participate in MVR. No MVR
multicast traffic is sent or received on this port.
Tagging
Select this checkbox if you want the port to tag the VLAN ID in all
outgoing frames transmitted.
All Port
Use this to select between Source Port, Receiver Port or None.
Tagging
Select this checkbox if you want the ports to tag the VLAN ID in all
outgoing frames transmitted.
Undo
Click this to load your last saved settings.
Apply
Click Apply to save your changes to the MES-2110’s run-time memory.
The MES-2110 loses these changes if it is turned off or loses power, so
use the Save Settings link in the navigation panel to save your changes
to the non-volatile memory when you are done configuring.
MVR Status
VLAN
This field displays the multicast VLAN ID.
Active
This field displays whether the multicast group is enabled or not.
Query Mode
This field displays whether the query mode is enabled or not.
Name
This field displays the descriptive name for this setting.
Mode
This field displays the MVR mode.
Source Port
This field displays the source port number(s).
Receiver Port
This field displays the receiver port number(s).
Tagging Port
This field displays which port tags outgoing frames with the VLAN ID.
Delete
To delete a multicast VLAN(s), select the rule(s) that you want to
remove in the Delete column, then click the Delete button.
Undo
Click this to clear the Delete check boxes.
Table 49 Configuration > IGMP Menu > MVR (continued)
LABEL
DESCRIPTION