ZyXEL Communications MES-2110 - Manual (Page 149)

Chapter 19 IP Source Guard
MES-2110 User’s Guide
149
ARP Inspection VLAN
Mode Select All-VLAN to have the Switch look at all the VLANs on
which ARP inspection is enabled.
Select Fixed to have the Switch look at the specific VLANs on
which ARP inspection in enabled..
ARP Inspection VLAN
(Fixed) Enter the ID of a static VLAN; the valid range is between 1 and
4094.
Action This is the port number.
Trust Use this to set trust ports.
Untrust Use this to set un-trusted ports.
All Port Use this to configure all ports as trusted or un-trusted ports.
ARP Inspection Status
Action
This shows whether the ARP inspection feature is enabled or
disabled on the MES-2110.
MAC-Filter-Aging-
Time This shows the number of minutes that the MES-2110 retains
MAC addresses in its MAC address table.
ARP Inspection VLAN
Mode This shows whether the MES-2110 look at all VLANs or specific
VLANs on which ARP inspection in enabled.
ARP Inspection VLAN
(Fixed) This shows the specific VLAN ID.
Trust/Untrust This shows whether the port is trusted or un-trusted.
Table 55 Configuration > ARP Inspection
LABEL DESCRIPTION