ZyXEL Communications MES-2110 User Manual

Page 130

Chapter 17 IGMP

MES-2110 User’s Guide

130

Note: Your MES-2110 automatically creates a static VLAN (with the same VID) when

you create a multicast VLAN in this screen.

Figure 59 Configuration > IGMP Menu > MVR

The following table describes the related labels in this screen.

Table 49 Configuration > IGMP Menu > MVR

LABEL

DESCRIPTION

MVR
Active

Select this check box to enable MVR to allow one single multicast VLAN
to be shared among different subscriber VLANs on the network.

Name

Enter a descriptive name (up to 32 printable ASCII characters) for
identification purposes.

Multicast VLAN
ID

Enter the VLAN ID (1 to 4094) of the multicast VLAN.

Query Mode

Choose Auto to have the MES-2110 select the querier automatically, or
Disable to turn this feature off.

Mode

Specify the MVR mode on the MES-2110. Choices are Dynamic and
Compatible.

Select Dynamic to send IGMP reports to all MVR source ports in the
multicast VLAN.

Select Compatible to set the MES-2110 not to send IGMP reports.