ZyXEL Communications MES-2110 - Manual (Page 172)

Chapter 22 Mgmt Config and System Restart Menu
MES-2110 User’s Guide
172
22.6 The User Configuration Screen
Use this screen to configure user names, passwords and access right for up to five
user accounts. Click Mgmt Config > User Config to open the following screen.
Note: It is recommended that only one user log in and manage the device at a time.
When multiple users configure the device settings simultaneously, changes
may be overwritten.
Figure 86 Mgmt Config > User Config
The following table describes the labels in this screen.
Table 70 Mgmt Config > User Config
LABEL DESCRIPTION
User Name Enter a name to identify the user account. You can type up to 15
characters using characters found on a standard keyboard.
User Password Enter a password associated with the user name. You can type up
to 15 characters using characters found on a standard keyboard.
User-Level Assign access rights for the user account.
Read/Write users can manage the MES-2110 settings as an
administrator.
Read Only users can only view the MES-2110 settings.
Undo Click this to restore your last saved settings.
Apply Click Apply to save your changes to the ZyXEL Device’s run-time
memory. The ZyXEL Device loses these changes if it is turned off
or loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory.