ZyXEL Communications MES-2110 - Manual (Page 160)

Chapter 21 QoS
MES-2110 User’s Guide
160
21.3 The 802.1p Priority Table
Use this screen to assign a priority level for each port. Click Configuration > QoS
Menu > 802.1p Priority to open the following screen.
Figure 76 Configuration > QoS Menu > 802.1p Priority
The following table describes the labels in this screen.
Table 61 Configuration > QoS Menu > 802.1p Priority
LABEL DESCRIPTION
Port This label shows the port you are configuring.
Priority Assign a priority level to the port.
Undo Click this to load your last saved settings.
Apply Click Apply to save your changes to the ZyXEL Device’s run-time
memory. The ZyXEL Device loses these changes if it is turned off
or loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory.