ZyXEL Communications MES-2110 - Manual (Page 162)

Chapter 21 QoS
MES-2110 User’s Guide
162
Use this to assign DSCP priority settings. Click Configuration > QoS Menu > IP
DSCP Priority to open the following screen.
Figure 78 Configuration > QoS Menu > IP DSCP Priority
The following table describes the labels in this screen.
Table 63 Configuration > QoS Menu > IP DSCP Priority
LABEL DESCRIPTION
Number Enter the DSCP classification identification number (0-63).
Priority Assign a MES-2110’s priority level (Low, Normal, Preferred or
High) to the DSCP value.
Undo Click this to load your last saved settings.
Apply Click Apply to save your changes to the ZyXEL Device’s run-time
memory. The ZyXEL Device loses these changes if it is turned off
or loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory.