ZyXEL Communications MES-2110 User Manual
Page 184

Chapter 23 Command Line Interface
MES-2110 User’s Guide
184
show dhcp static-binding
Displays the DHCP static binding table.
show dhcp dynamic-binding
Displays the DHCP dynamic binding table.
show dot1x global
Displays 802.1x global information.
show dot1x radius-server
Displays the 802.1x RADIUS server
configuration.
show dot1x port-control
Displays the 802.1x port-control information.
show email-alarm
Displays the email configuration.
show frame
Displays the maximum frame size configuration.
show hdos
Displays the Denial-of-Service configuration.
show igmp
Displays the igmp configuration.
show interface
Display detailed port information for all ports.
show LACP
Displays LACP information.
show locked-mac
Displays the locked MAC address learning status.
show logins
Displays a list of recent logins.
show loop
Displays the loop detection configuration.
show mac
Displays the MAC table.
show mac-aging-time
Displays the MAC aging time.
show mac-filter-table
Displays the MAC filter table.
show mac-limit
Displays the MAC limit table.
show mirror
Displays the mirror configuration.
show mvr
Displays multicast status, including the port
number, VLAN ID and multicast group members
on the switch. Optionally, displays the type of
each multicast VLAN.
show priority-override
Displays the priority override status table.
show qinq-sp-tpid
Displays the Server Provider Tag Prototol
Identifier.
show qos priority-mode
Displays QoS priority-mode and IP-over-tag
settings.
show qos default-priority-queue
Displays the QoS port priority.
show qos tag-priority-queue
Displays the QoS tag priority.
show qos ip-tos-pri-queue
Displays the QoS IP-TOS priority to queue
mapping.
show qos schedule
Displays the QoS schedule type.
show rmon port [+n | all]
Displays the device’s RMON information.
+n
: Enter plus sign followed by port number to
display just that port’s information. For example,
show rmon port +1
. You can also chain
multiple port numbers together, such as
show
rmon port +1+2+6
(which displays information
for just ports 1, 2, and 6).
all
: Displays RMON information for all ports.
Table 78 Privileged Commands
COMMAND
DESCRIPTION