Roland RK-300 User Manual
Page 97
97
Playing Along with a Song
3.
Touch < Count >.
The following screen appears.
fig.d-Count.eps
4.
Touch “Count”
to turn it “On.”
Turn this “Off” if you don’t want a count to sound.
5.
Touch “Count Mode”
to select the type of count.
6.
Touch “Count In Sound”
to select the count-in sound.
If you touch < Reset >, all settings (parameters) shown in the current screen will return to
their factory-set values.
7.
When you’re finished making settings, press the [EXIT] button.
8.
Press the [PLAY/STOP] button.
The count will sound.
Type of count
How the count is sounded
Count In
A two-measure count sounds before the song plays.
Countdown
A one-measure count sounds at the end of the song’s introduction
Count In/down
A two-measure count sounds before the song plays, and a one-measure count sounds
at the end of the song’s introduction
Setting
Click, Electronic, Voice (Japanese), Voice (English), Animal, Wood Block, Castanets, Hand Clap
RK-300_e.book 97 ページ ２００８年９月１０日 水曜日 午後４時６分