Roland RK-300 - Manual (Page 107)

107
Singing Along with the VIMA
Preparing the control pedal switch for use
With the factory settings, pedal operations will damper pedal.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu-3-1.eps
* There are three menu screens. Touch to switch screens.
3. Touch < Controller >.
The following screen appears.
fig.d-Controller.eps
4.
Touch “Control Pedal Assign” to choose “Vocal Effect.”
5. Press [EXIT] to complete the setting.
Turning the effect on/off
6.
Press the pedal.
The effect will turn on/off each time you press the pedal. When the effect is on, the [EFFECTS] button
will light.
RK-300_e.book 107 ページ ２００８年９月１０日 水曜日 午後４時６分