Roland RK-300 User Manual
Page 194
194
Settings
You can restore the settings you’ve changed on the RK-300
to their factory-set condition. This operation is called
“Factory Reset.”
When you perform a Factory Reset, all the settings you have
stored will be erased, and the RK-300 will return to the
factory-set condition.
This operation will not restore the contents of user memory
to the factory-set condition.
Refer to “Initializing User Memory (Format User Memory)” (p.
193).
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-3.eps
* There are three menu screens. Touch
to switch
screens.
3.
Touch < Factory Reset >.
A message asking for confirmation appears in the screen.
fig.d-FactoryRst1.eps
* By touching
without changing the settings.
4.
Touch < OK > in the screen to execute the Factory
Reset.
The factory reset will be executed.
5.
When the Factory Reset has been completed,
switch off the RK-300s power, then turn it back on
again.
fig.d-FactoryRst2.eps
•
Never turn off the power while the screen indicates
“Executing...”
Restoring the Factory-Set Condition
(Factory Reset)
RK-300_e.book 194 ページ ２００８年９月１０日 水曜日 午後４時６分