Roland RK-300 - Manual (Page 179)

179
Settings
This specifies the shape of the bars that indicate notes in the
piano roll screen.
When gradation is on
fig.d-C-GradationOn.eps
When gradation is off
fig.d-C-GradationOff.eps
You can specify the logo shown on the player piano in the
classic type piano roll screen.
Here you can change the settings for how the modern type
piano roll screen is displayed.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-2.eps
* There are three menu screens. Touch to switch
screens.
3.
Touch < Piano Roll (Modern Type) >.
The following screen appears.
fig.d-PianoRollM.eps
4.
To change the setting, touch for the item
you want to specify.
If you touch < Reset >, all settings (parameters) shown in the
current screen will return to their factory-set values.
5.
When you’re finished making settings, press the
[EXIT] button.
Specifying How Notes are Shown
(Gradation)
Setting Explanation
On
The color of the note bars will gradually
fade out.
Off
The note bars will retain their color over
the full length of the note.
Specifying the Logo of the Piano
(Logo)
Setting
ROLAND, RODGERS, EDIROL, BOSS
Modern Type Piano Roll
Screen Settings
RK-300_e.book 179 ページ ２００８年９月１０日 水曜日 午後４時６分