Roland RK-300 - Manual (Page 37)

37
Getting Ready
You can adjust the screen brightness for best visibility.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
fig.d-MainScreen.eps
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-3.eps
* There are three menu screens. Touch to switch
screens.
3.
Touch < System >.
fig.d-System.eps
4.
Touch “Display Brightness” to adjust the
brightness.
5.
Press the [EXIT] button when you’ve finished
making adjustments.
Cautions regarding the LCD display
• In order to provide the highest possible image quality,
the RK-300 uses a TFT liquid crystal display. Due to the
nature of a TFT liquid crystal display, the screen may
contain pixels that fail to light or that remain constantly
lit, but please be aware that this is not a malfunction or
defect.
• The brightness may be affected by the temperature.
Adjusting the Brightness of the Screen
Setting Explanation
1–3
Higher settings will make the display
brighter.
RK-300_e.book 37 ページ ２００８年９月１０日 水曜日 午後４時６分