Roland RK-300 - Manual (Page 129)

129
Enjoying Music and Video
4.
To stop using ANIME effect, press the [ANIME] button to turn off its
illumination.
You can use the D Beam controller to apply additional change to the ANIME effect.
1.
Press a D BEAM button, [PITCH], [FILTER], or [VOLUME], a number of times until
the button is lit red.
2. Move your hand above the D Beam controller.
The ANIME effect will change according to the movement of your hand above the D Beam controller.
• By changing a pedal’s function, you can use pedal operations to apply the same effect as the D
Beam controller. For details on how to make settings, refer to “Assigning Functions to Pedals (Left
Pedal/Center Pedal)” (p. 171) and ““Assigning Functions to Control Pedal (Control Pedal)” (p. 172).
Using the D Beam Controller to Vary the ANIME Effect
Button Button status Explanation
[PITCH]
Lit Red
The movement of the graphics or text shown in the screen will change.
[FILTER]
The variation that occurs when you press the [PITCH] button will
change.
[VOLUME] The color of the graphics or text shown in the screen will change.
RK-300_e.book 129 ページ ２００８年９月１０日 水曜日 午後４時６分