Roland RK-300 - Manual (Page 40)

40
Getting Ready
Here’s how to choose whether the image will be shown on a
television connected to the VIDEO OUTPUT jack or an
external display connected to the ANALOG RGB OUTPUT
connector.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
fig.d-MainScreen.eps
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-2.eps
* There are three menu screens. Touch to switch
screens.
3.
Touch < Video >.
The following screen appears.
fig.d-Video.eps
4.
Touch “Output Select” to select the video
output destination.
In some cases, the RK-300’s display screen may flicker when
you switch this setting, but this does not indicate a
malfunction.
5.
Press the [EXIT] button when you’ve finished
making the setting.
You must turn off the power of the television or external
display in the following order.
1.
Minimize the volume of the RK-300 (p. 34).
2.
Switch off the connected television or display.
3.
Switch off the RK-300 (p. 33).
Selecting the Video Output Destination
Setting Explanation
Video VIDEO OUTPUT jack
RGB ANALOG RGB OUTPUT connector
Switching Off Your Television or
External Display
RK-300_e.book 40 ページ ２００８年９月１０日 水曜日 午後４時６分