Roland RK-300 - Manual (Page 57)

57
Performing
The RK-300 contains the tones of numerous instruments in addition to the seven tones accessible
through the INSTRUMENT buttons.
From this large selection of internal instruments, you can select and assign your favorite tones to the
[1] button, [2] button, and [3] button. The sounds you assign (user tones) are remembered even when
the RK-300’s power is off, so you’ll find it convenient to register your favorites as user sounds.
Setting user tones
1. Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2. Touch < User > tab.
The screen will show three buttons assigned to user sounds. You can also select these sounds by
pressing tone buttons [1], [2], or [3].
When the RK-300 is shipped from the factory, “Brass Fall” is assigned to [1] button, “Nylon-str.Gt” is
assigned to [2] button, and “Flute” is assigned to [3] button.
fig.d-userTone1.eps
Performing with Your Favorite Sounds (User Tones)
RK-300_e.book 57 ページ ２００８年９月１０日 水曜日 午後４時６分