Roland RK-300 - Manual (Page 189)

189
Settings
Normally, you don’t need to install a driver in order to
connect the RK-300 to your computer via the USB MIDI
connector. However, if some problem occurs, or if the
performance is poor, using the original Roland driver may
solve the problem. If you do so, make the following setting
to specify the USB driver you intend to use before you install
the driver.
In some cases, when USB memory is connected to the USER
MEMORY connector, it may take longer for data to be
loaded, or data may fail to be loaded successfully.
If this happens, changing the communication settings for
the USB memory may help.
* Changing the settings is normally not required.
In some cases, when USB memory is connected to the EXT
MEMORY connector, it may take longer for data to be
loaded, or data may fail to be loaded successfully.
If this happens, changing the communication settings for
the USB memory may help.
* Changing the settings is normally not required.
In some cases, when CD drive is connected to the EXT DRIVE
connector, it may take longer for data to be loaded, or data
may fail to be loaded successfully.
If this happens, changing the communication settings for
the CD drive may help.
* Changing the settings is normally not required.
Changing the USB Driver Settings
(USB Driver)
Setting Explanation
Generic
Choose this if you want to use the standard
USB driver that was included with your
computer. Normally, you should use this
mode.
Original
Choose this if you want to use a USB driver
downloaded from the Roland website.
Changing the Communication Settings
for User Memory (User Memory Mode)
Setting
Mode 1, Mode 2
Changing the Communication Settings
for External Memory (Ext. Memory Mode)
Setting
Mode 1, Mode 2
Changing the Communication Settings
for External Drive (Ext. Drive Mode)
Setting
Mode 1, Mode 2
RK-300_e.book 189 ページ ２００８年９月１０日 水曜日 午後４時６分