Roland RK-300 - Manual (Page 174)

174
Settings
This adjusts the playback volume of music CDs.
This adjusts the recording level for audio recording.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-2.eps
* There are three menu screens. Touch to switch
screens.
3.
Touch < Video >.
The following screen appears.
fig.d-Video.eps
4.
To change the setting, touch for the item
you want to specify.
If you touch < Reset >, all settings (parameters) shown in the
current screen will return to their factory-set values.
5.
When you’re finished making settings, press the
[EXIT] button.
Adjusting the Volume of the Audio
Signal (Audio Play Level)
Setting
0–127
Adjusting the Audio Recording Level
(Audio Recording Gain)
Setting
-24 dB–6 dB
Most commercially available SMF music files consists of
sixteen channels (parts).
Each channel contains a separate performance; for
example, channel 1 might contain strings and channel 2
bass, with the drums on channel 10. The song data
consists of these sixteen channels of performances, played
back simultaneously.
fig.MelodyChannel.eps
Normally, when you play back Roland SMF music files (p.
216), the melody is assigned to channel 4.
However, some commercially available SMF music files
assigns the melody channel to a different channel. In such
cases, you’ll need to change this setting to the channel
that is used by your music files.
Channel 1
Channel 2
Channel 10
Strings
Bass
Drums
Channel 16 Guitar
Video Settings
RK-300_e.book 174 ページ ２００８年９月１０日 水曜日 午後４時６分