Roland RK-300 User Manual
Page 192
192
Settings
You can initialize (format) USB memory that’s connected to
the EXT MEMORY connector. If you want to erase the entire
contents of USB memory and return it to the condition in
which you purchased it, execute the following procedure.
This operation will not initialize any settings other than the
contents of USB memory. If you want to return settings other
than the contents of USB memory to the factory-set state,
please execute Factory Reset (p. 194) and Initializing User
Memory (p. 193).
1.
Connect your USB memory to the EXT MEMORY
connector (p. 36).
2.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
3.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-3.eps
* There are three menu screens. Touch
to switch
screens.
4.
Touch < Format External Memory >.
A message asking for confirmation appears in the screen.
fig.d-ExtM-Init.eps
* By touching
without changing the settings.
5.
Touch < OK >.
Initialization will begin.
The entire contents of USB memory will be erased.
•
Never turn off the power while the screen indicates
“Initializing...”
•
If the screen indicates “Error,” refer to the “Error
Messages” (p. 209).
Initializing External Memory
(Format External Memory)
RK-300_e.book 192 ページ ２００８年９月１０日 水曜日 午後４時６分