Roland RK-300 User Manual
Page 64
64
Performing
By choosing sounds whose names are separated by a “/” (e.g., Piano/ Str.1), you can play separate
sounds in the right and left-hand regions, separated by a specific key. This is referred to as “split
performance.”
Split performance lets you play different sounds in the left-hand and right-hand regions of the
keyboard.
When using split performance, the boundary key is called the “split point” and is included in the left-
hand keyboard region.
* This is set to “F#3” at the factory settings.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2.
Touch < User > tab.
The screen will show three buttons assigned to user sounds. You can also select these sounds by
pressing tone buttons [1], [2], or [3].
fig.d-userTone1.eps
3.
Touch the button whose tone assignment you want to change.
You can also press one of the INSTRUMENT buttons [1], [2], or [3] to select the button whose tone
assignment you want to change.
fig.d-UserTone2.eps
Playing Different Tones with the Left and Right Hands (Split Performance)
RK-300_e.book 64 ページ ２００８年９月１０日 水曜日 午後４時６分