Roland RK-300 - Manual (Page 177)

177
Settings
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-2.eps
* There are three menu screens. Touch to switch
screens.
3.
Touch < Notation >.
The following screen appears.
fig.d-Notation.eps
4.
To change the setting, touch for the item
you want to specify.
If you touch < Reset >, all settings (parameters) shown in the
current screen will return to their factory-set values.
5.
When you’re finished making settings, press the
[EXIT] button.
The RK-300 can display notation divided into the right-hand
and left-hand parts. You can specify how the notation of the
right-hand and left-hand parts will be displayed.
This specifies the timing at which the notation will start to be
displayed.
Notation Settings Selecting the Part for which Notation
will be Shown (Part)
Setting Explanation
Upper
The notation for only the right-hand part
will be displayed.
Both
The notation for both the right-hand and
left-hand parts will be displayed.
Specifying the Timing with which
Notation Display is to Begin
(Start Position)
Setting Explanation
First Note
The notation will be shown from the first
note.
Song Top
The notation will be shown from the intro
of the song.
Selecting the Part Displayed in the
Right-hand Notation (Upper)
Setting
1–16
Selecting the Part Displayed in the
Left-hand Notation (Lower)
Setting
1–16
Displaying Note Names in the Score
(Pitches)
Setting Explanation
Off Note names will not be displayed.
C, D, E Note names will be displayed as “C, D, E”.
DoReMi
(Fixed)
Note names will be displayed as “fixed do.”
DoReMi
(Movable)
Note names will be displayed as “movable
do.”
RK-300_e.book 177 ページ ２００８年９月１０日 水曜日 午後４時６分