Roland RK-300 - Manual (Page 41)

41
Getting Ready
Here’s how you can use the RK-300’s display to view the image that’s being shown on the external display or
television connected to the RK-300. Normally, the RK-300’s display will show the main screen.
fig.P-VMonitorBtn.eps
1.
Press the [VIDEO MONITOR] button so it’s lit.
The RK-300’s own display will show the same image as shown on the externally connected display or television.
2.
To return to the main screen, press the [VIDEO MONITOR] button or the [EXIT] button to turn
off the [VIDEO MONITOR] button’s light.
Using the RK-300’s Display to Check the Image Shown on the
External Display (Video Monitor)
If the video function is off
(When all video function select buttons (p. 21)
are unlit:)
The VIMA logo is shown.
* You can use the Blank Screen (p. 176)
setting to change the image.
If no external video device is connected
Example:
If you press the [DVD] button when nothing is
connected to the DVD INPUT jacks, a message
like the one shown at right will appear .
RK-300_e.book 41 ページ ２００８年９月１０日 水曜日 午後４時６分