beautypg.com

Roland RK-300 User Manual

Page 207

background image

207

Troubleshooting

The image is not shown
cleanly in the television

Even if you make all of the recommended settings, there may be cases in
which the image is not shown cleanly in your television. (For example, the
display may not match the screen size, or may be skewed from the
center.)

Lyric display is wrong

For some types of music files, the lyrics may sometimes be displayed
incorrectly.

In the notation screen, the lyrics or notes may sometimes be incorrectly
shown outside the screen display region.

Notation display is wrong

If you’ve selected a channel that does not contain performance data,
notes will not be shown in the notation. In the notation display settings,
change the displayed channel (melody channel).

p. 173

The displayed notation is not suitable for sophisticated or complex
songs. Also, grace notes and notes shorter than a 16 note cannot be
shown.

p. 94

In some cases, lyrics and notes may sometimes be shown outside the
display area of the notation screen, and will not appear correctly.

Something’s wrong with the sound from the microphone

Microphone volume is too
low (or inaudible)

Is the microphone connected correctly?

p. 101

Could the [MIC 1]/[MIC 2] knobs be set to the minimum volume?
The microphone 1 volume is adjusted with the [MIC 1] knob, and the
microphone 2 volume is adjusted with the [MIC 2] knob.

p. 102

Your voice in the microphone
sounds wrong

Could the [ECHO] button be lit?
If the [ECHO] button is lit, echo (reverberation) will be added to your voice
in the microphone.

p. 108

Could the [EFFECTS] button be lit?
If the [EFFECTS] button is lit, an effect will be applied to your voice in the
microphone.

p. 104

Could the [INPUT] button be lit?
If the [INPUT] button is lit, the MIC 1/GTR jack will be a guitar input.

p. 101

The volume of the
microphone changes

Turning the panel [VOLUME] knob will adjust the overall volume
including the microphone volume.
To change the microphone volume, use the [VOLUME] knob to set the
overall volume for the entire RK-300, and then use the [MIC 1] knob or
[MIC 2] knob to adjust the volume of each microphone.

p. 102

Symptom

Cause/Action

Page

RK-300_e.book 207 ページ 2008年9月10日 水曜日 午後4時6分