Roland RK-300 - Manual (Page 176)

176
Settings
This setting changes the proportional relationship between
the vertical and horizontal dimensions of the image that is
output from the RK-300 to the television or display
connected to the OUTPUT jack.
The RK-300’s display screen has a horizontal/vertical ratio of
16:9. Televisions and displays have screen sizes with a
horizontal/vertical ratio of 4:3 or 16:9 (wide screen).
You can’t change the aspect ratio of the image that is output
from the ANALOG RGB OUTPUT connector to an external
display or a television.
fig.aspect.eps
• If the image is still not shown correctly even though you
have adjusted the RK-300’s aspect ratio to match the
television or display you’ve connected, please change the
settings of the connected television or display.
Refer to p. 40.
Here you can specify what will be shown on the external
display/television/internal display when all of the [DVD]–
[SLIDE SHOW] buttons are extinguished and the video
output is off.
Selecting the Aspect Ratio of the Video
Output (Video Output Aspect Ratio)
Setting Explanation
16:9
Use this setting if the connected television
or display has a screen aspect ratio of 16:9.
4:3
Use this setting if the connected television
or display has a screen aspect ratio of 4:3.
4: 3 Television
Original image
4: 3
Aspect Ratio
16: 9
16: 9 Television
Image is displayed correctly
Image is distorted Image is
not completely visible
Selecting the Video Output
Destination (Output Select)
Selecting the Screen That’s Shown
When the Video Output is Off
(Blank Screen)
Setting Explanation
Panel
The RK-300’s display will show the
same image as the television or
display that is connected to the RK-
300.
ROLAND VIMA,
VIMA
“Roland VIMA” or “VIMA” will be
displayed.
Black Nothing will be displayed.
RK-300_e.book 176 ページ ２００８年９月１０日 水曜日 午後４時６分