Roland RK-300 - Manual (Page 46)

46
Performing
You can add reverberation (reverb) to the sound.
Adding reverb will produce the spacious sensation of performing in a concert hall.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-2.eps
* There are three menu screens. Touch to switch screens.
3. Touch < Sound >.
The following screen appears.
fig.d-Sound.eps
4.
Touch “Reverb” to adjust the setting.
If you touch < Reset >, all settings (parameters) shown in the current screen will return to
their factory-set values.
5. When you’re finished making adjustments, press the [EXIT] button.
Adding Reverberation (Reverb)
Setting Explanation
Off, 1–10
Higher settings produce deeper reverb, enhancing the sense of spaciousness and
depth. With a setting of Off there will be no reverb.
RK-300_e.book 46 ページ ２００８年９月１０日 水曜日 午後４時６分