Roland RK-300 - Manual (Page 143)

143
Recording and Saving
5.
Touch < SMF >.
The [REC] button will light, and the following screen appears.
fig.d-SMF-Rec-2.eps
* If you decide not to record, touch < Cancel >.
6.
Touch < Add On >.
The [PLAY/STOP] button will blink, and the RK-300 will enter recording-standby mode.
7.
Press the [PLAY/STOP] button.
You’ll hear a two-measure count, and then recording will start.
Recording will also start if you play the keyboard without pressing the [PLAY/STOP] button. In this
case, you won’t hear a count.
When recording starts, the [PLAY/STOP] button and [REC] button will light.
Stop recording
8.
Press the [PLAY/STOP] button.
Recording will stop.
Play back the recorded performance
9.
Press the [ ] button, and then press the [PLAY/STOP] button.
The recorded performance will play back.
10.
To stop playback, press the [PLAY/STOP] button once again.
Playback will stop automatically when you reach the end of the song.
• The recorded performance will disappear when you turn off the power. If you want to keep the
recording, you must save it to “Favorites” (p. 144).
RK-300_e.book 143 ページ ２００８年９月１０日 水曜日 午後４時６分