Roland RK-300 - Manual (Page 63)

63
Performing
Adjusting the volume balance of layered sounds
When you’ve selected layered sounds, you can adjust the volume balance of the two sounds.
This setting is remembered for each user button.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu-3-1.eps
* There are three menu screens. Touch to switch screens.
3.
Touch < Layer/Split >.
The following screen appears.
fig.d-LayerSplit.eps
4.
Touch “Layer Balance” to adjust the setting.
If you touch < Reset >, all settings (parameters) shown in the current screen will return to
their factory-set values.
5.
When you’re finished making adjustments, press the [EXIT] button.
Setting Explanation
9:1, 8:2, 7:3, 6:4, 5:5, 4:6,
3:7, 2:8, 1:9
A higher number means a louder volume.
Example: If you choose a setting of 7:3 for the “Piano + Str.1” sound
Piano = volume 7, Strings 1 = volume 3
RK-300_e.book 63 ページ ２００８年９月１０日 水曜日 午後４時６分