Roland RK-300 - Manual (Page 190)

190
Settings
After you’ve written the desired songs to a CD-R, you’ll need
to perform the following “Finalize” operation so that the CD
can be played by a conventional CD player as a music CD.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-3.eps
* There are three menu screens. Touch to switch
screens.
3.
Touch < Finalize >.
A screen like the following appears.
fig.d-Finalize.eps
4.
Touch < OK >.
Finalization will begin, and when it is completed you will
return to the menu screen.
• Never turn off the power while the display indicates “Now
executing...”
• We cannot guarantee that a music CD created on the RK-
300 will play on all CD players. Depending on your CD
player’s support for CD-R discs, music CDs you create may
not play correctly.
Other Settings
Preparing a CD-R Disc for Playback on
Another CD Player (Finalize)
What’s finalization?
Finalization is the process of writing final information (the
number of songs, the song numbers, the playback times,
etc.) to a CD-R disc. When you “finalize” a CD-R disc that
was recorded or written by the RK-300, that disc will be
playable as a music CD in another CD player.
* After finalization, it will no longer be possible to record
or write additional material to that disc. You should
finalize the disc when you have completed your music
CD and don’t need to write or record any more data.
OK
When writing is finished, the disc will be
finalized to complete the music CD.
No further data can be written to a CD-R
disc that has been finalized, even if space
remains on the disc.
Cancel
The disc will not be finalized when writing
is finished.
After the tracks have been written, you will
still be able to add more tracks if space
remains on the disc.
RK-300_e.book 190 ページ ２００８年９月１０日 水曜日 午後４時６分